Introduction; Document Content And Organization - Samsung OfficeServ 7400 Installation Manual

INTRODUCTION

Purpose
OfficeServ 7400 is a key phone system proper for mid-small sized office using circuit lines
with 500 subscribers or less. OfficeServ 7400 provides not only the voice call function but
also the data transfer function. This manual describes the condition for OfficeServ 7400
system installation and how to install, inspect and operate the system.

Document Content and Organization

This manual consists of eight chapters and abbreviations. Each chapter is summarized as below.
CHAPTER 1. Before Installing
This chapter describes the checklists, such as the installation site and the grounding & the
power conditions, to be inspected before installing the OfficeServ 7400 system.
This chapter also describes the items included in the OfficeServ 7400 package and the
installation procedure.
CHAPTER 2. Installing Cabinets
This chapter describes how to install an OfficeServ 7400 cabinet on the ground or inside a
rack, depending on the installation environment, and how to connect the grounding wire.
CHAPTER 3. Mounting and Replacing Boards
This chapter describes how to mount or replace various boards of the OfficeServ 7400 system.
CHAPTER 4. Connecting External Batteries and Rectifiers
This chapter describes how to connect an external battery and a rectifier to the OfficeServ
7400 system.
CHAPTER 5. Connecting the Power
This chapter describes how to connect the power to the OfficeServ 7400 system.
CHAPTER 6. Connecting C.O. lines
This chapter describes how to connect C.O. lines to the OfficeServ 7400 system.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7400 Installation Manual
I