Cisco EX90 User Manual page 38

Cisco TelePresence System EX90
Contents Introduction
Administrator Settings—SIP Settings
The SIP settings pane lets you specify:
•
Your URI.
•
The Default transport layer, this can be set to TCP,
UDP, TLS or Auto.
•
The Proxy type can be set to Standard, Alcatel,
Avaya, Cisco, Microsoft, Nortel, Experimental,
Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the
case of manual the proxy address must be specified
by you.
•
Login name and Password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14724.06 User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 The settings The settings
38
User guide
Web interface Contact us
www.cisco.com