Cisco EX90 User Manual page 35

Cisco TelePresence System EX90
Contents Introduction
Administrator Settings—Call Settings
The Call Settings pane lets you specify:
•
Auto Answer On or Off. If you set this to On, the
system will respond automatically to incoming calls.
Note that the microphone wil NOT be muted. If risk of
eavesdropping is an issue, you may want to set this
setting to Off.
•
Auto Answer Delay. Specify the time until your
system actually reponds to an incoming call.
•
Default Call Rate. If your connection has limited
capacity you may want to use this setting.
•
Max Incoming/Outgoing Bandwidth. You may
specify these separately. May come in handy if you
are on an asymmetric connection.
•
Default Call Protcol. Specify which protocol to use
as default.
Note how the settings chosen are indicated. In the
example shown, Auto Answer is set to Off.
D14724.06 User guide EX90, TC4.2, July 2011.
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 The settings The settings
35
User guide
Web interface Contact us
www.cisco.com