Cisco TelePresence EX Series Getting Started Manual page 24

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
Web interface
Setting the system/codec password
You need a username and password to sign in to the web
and command line interfaces of your system.
The video conference system is delivered with a default
user account with username admin and no password set.
This user has full access rights to the system.
NoTE: We strongly recommend that you set a password for
the admin user to restrict access to system configuration.
Make sure to keep a copy of the password in a safe
You have to contact your Cisco representative if you have
forgotten the password.
1. Click the small arrow next to your user name in the
upper right corner and select Change
2. Enter the Current password, the New
repeat the new password in the appropriate input fields.
The password format is a string with 0–64 characters.
If a password is not currently set, use a blank
password.
3. Click Change password.
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
place.
password.
password, and
Current
Configuration Configuration Appendices
24
www.cisco.com