Cisco TelePresence EX Series Getting Started Manual page 13

Cisco TelePresence Systems
GettinG started Guide
Table of contents Introduction
touch controller
Provisioning set-up
(when using a provisioning system)
1. Start the Provisioning Wizard
Tap More > Settings > Administrator Settings > Network
Settings > Provisioning and then Start.
NoTE: When connecting an EX or MX system for the first
time, the Provisioning Wizard will start automatically.
3. Enter required parameters
Enter the parameters required for the chosen provisioning infrastructure (see illustrations below). Then tap
Cisco TelePresence Callway
Upon ordering the Cisco TelePresence Callway service, you
have received a Video number and an
Please send an e-mail to support@callway.com
have a video phone number and an activation code.
Back Configure Your TelePresence Unit
Upon ordering the Cisco TelePresence Callway
service, you have received a Video number and an
Activation code.Please send an e-mail to support@
callway.com if you don't have a video phone number
and an activation code.
Infrastructure Cisco TelePresence Callway
Video number
Activation code
Cancel
Back to task overview
D14639.06 Video Systems Getting Started Guide (TC5.1) | 2012 FEBRUARY | © 2011-2012 Cisco Systems, Inc. All rights reserved.
User interfaces
2. Select provisioning infrastructure
Select one of the following supported provisioning systems:
• Cisco TelePresence Callway
• Cisco UCM (Unified Communications Manager)
• Cisco VCS (Video Communication Server)
Tap Next to proceed.
Cisco UCM
Contact your UCM provider to get the IP address or DNS
Activation code. name of the Cisco UCM
if you don't You can find more details about setting up Cisco UCM
provisioning in the Administering TC endpoints on CUCM
guide.
Back
Infrastructure
External Manager
Register
1)
The DHCP server can be set up to provide the External Manager
address automatically (DHCP Option 150). Any input in the input
field will override the setting provided by DHCP.
Configuration Configuration Appendices
Register to complete the procedure.
(External Manager) .
1)
Configure Your TelePresence Unit
Cisco UCM
Cancel
Register
Configure Your TelePresence Unit
Select infrastructure:
Cisco VCS
Cisco TelePresence Callway
Cisco UCM
Cancel
Cisco VCS (for EX and MX Series only)
Contact your VCS provider to get the IP address or DNS
name of the Cisco VCS (External Manager), the SIP Domain,
and, if required, the Username/Password
the video system with the provisioning server.
Have a look at the Cisco VCS provisioning for MX and
EX Series appendix for more information about VCS
provisioning.
Configure Your TelePresence Unit
Back
Infrastructure Cisco VCS
Username
Password
Domain
External Manager
Cancel
13
Next
for authenticating
Register
www.cisco.com