Cisco Telepresence System EX60 User Manual page 17

Cisco Telepresence System EX60
Contents Introduction
Calling participants to add them to an ongoing call (Multiway
Calling more than one using Multiway™ is an optional feature that may, or may not, be present on your system. If in doubt, ask your System Administrator.
While in a call you may add
participants provided that
your system permits to do
so. Tap Hold to put the
ongoing call on hold...
The call will now be transferred to the Multiway
server and handled from there. This may take a
little while...
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60 Using EX60 Using EX60
)
™

... then select, in the
™
When everything is
ready the Join button
will appear. Tap this and
the bottom line will change
to read Meeting. This may take a
little while.
Since the calls have been transferred
to the Multiway server you are still in a point-
to-point call, but now with the Multiway server
as the far end. This applies to all the other
participants as well.
17
Scheduled meetings

usual way, whom to
add to the ongoing
call.
The Settings Contact us


Once you have selected someone (

tap START ( ) to begin including this
participant in the meeting.
Tap END to disconnect yourself.
The other participants must
do the same to disconnect
themselves from the Multiway
server.
www.cisco.com
User guide

),