Do Not Disturb - Cisco Telepresence System EX60 User Manual

Cisco Telepresence System EX60
Contents Introduction

Do not disturb

When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND.
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.
Using Touch Tones (DTMF)
Sometimes you may be urged to enter touch tones (DTMF)
during a call, typically to reach extensions or to provide a
pin code.

In a call, tap touch tones (
Use the touch tone keypad
and tap anywhere outside it to exit.
D14779.05 User guide EX60, TC5.0, November 2011.
All contents are Copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
Connecting EX60
Far end camera control
If the other end point permits
it, you may control their
camera. This is known as Far
end camera control.
If the other camera cannot
be controlled, nothing
happens.


.
)

( )
Using EX60 Using EX60 Scheduled meetings

Adjust zoom and pan as required.
Tap Back to exit the menu
19
The Settings Contact us


Tap the name along the bottom line

and then tap Camera Control (

User guide

( )
)
www.cisco.com