Do Not Disturb; Using Touch Tones (Dtmf); Far End Camera Control - Cisco TelePresence EX90 User Manual

Cisco TelePresence System EX90

Do not disturb

When set to Do Not Disturb (DND), ringtones are muted
and missed calls you get while having DND active, will be
presented when you exit DND..
You may, however, place calls as much as you like. To
activate this feature, press the icon in the upper left corner.
Press again to deactivate.
You may also hide the Do Not Disturb poster by tapping
Hide.

Using Touch Tones (DTMF)

Sometimes you may be urged to enter touch tones
(DTMF) during a call, typically to reach extensions or to
provide a pin code.
In a call,
tap Touch Tones
Use the
touch tone keypad.
Tap anywhere
outside it to exit.
User guide EX90, TC4.2, July 2011.
D14724.06
All contents are copyright © 2010–2011 Cisco Systems, Inc. All rights reserved.
All manuals and user guides at all-guides.com

Far end camera control

If the other end point
permits it, you may
control their camera.
This is known as Far end
camera control.
If the other camera cannot
be controlled, nothing
happens.
This works in Point-to-
point calls as well as
MultiSite calls.
23


Tap the name, whose camera shall be
controlled, along the bottom line
and then tap Camera Control (


Adjust zoom and pan as

required ( ). Tap Back to exit

the menu ( ).
User guide

( )

).
www.cisco.com