Http Provisioning - Cisco E20 Administrator's Manual

Cisco IP Video Phone E20
Contents Introduction
With TE4.1.0 the E20 supports provisioning and basic call functionality with Cisco
Unified Communications Manager (CUCM) version 8.5 and above. The E20
also supports Cisco Discovery Protocol (CDP) for easy deployment in CUCM
environments. Voice VLAN and Data VLAN are VLAN tags used by Cisco switches.
When provisioning mode is set to CUCM in the Start Wizard, the E20 will try to use
Voice VLAN if available in your network. When in other provisioning modes the E20
will try to use Data VLAN. See also the appendix for more on this.

HTTP provisioning

The E20 will send an HTTP/HTTPS request containing E20 parameter information
that will uniquely identify the E20 using Get/Post. The E20 will provide its serial No.
and MAC address.
D14330.12 Administrator guide Cisco IP Video Phone E20, TE4.1 November 2011.
All contents are Copyright © 2010–2011, Cisco Systems, Inc. All rights reserved.
Deploying E20 Deploying E20 Using E20
8
The settings Advanced settings
HTTP Provisioning examples
Redirect
<Provisioning>
<Redirect><URL>http://myProvisioningServer</URL><Method>GET</
Method></Redirect>
</Provisioning>
Software upgrade
<Provisioning>
<Software>
<URL>http://myProvisioningServer/download</URL>
<Version>TE4.0</Version>
<UpgradeIfLessThan>TE1.8</UpgradeIfLessThan>
<UpgradeIfGreaterThan>TE4.0</UpgradeIfGreaterThan>
</Software>
</Provisioning>
Server settings
<Provisioning>
<ServerSettings>
<Mode>VCS</Mode>
<Username>336835</Username>
<Password>222</Password>
<Domain>example.com</Domain>
<Address>MyExternalManager</Address>
<HTTPProtocol>HTTPS</HTTPProtocol>
<HTTPMethod>GET</HTTPMethod>
</ServerSettings>
</Provisioning>
Configuration
<Provisioning>
<Heartbeat>1</Heartbeat>
<Configuration>
<Audio item="1">
<SoundsAndAlerts item="1">
<RingTone item="1">Nordic</RingTone>
</SoundsAndAlerts>
</Audio>
</Configuration>
</Provisioning>
Administrator guide
Contact us
www.cisco.com