Draytek Vigor2860 Series User Manual page 321

Enable
Device Name
Action Type
File/Path
Index in Schedule
3. Enter all the settings and click OK.
4. A new maintenance profile has been created.
Check it to enable such profile.
The drop down list will display all the CPE devices detected
by Vigor2860 series. Choose the one which will be applied
with such new created profile.
There are three actions for you to choose for such profile.
Config Backup – It means such profile will be used for
configuration backup of the selected CPE.
Config Restore – It means such profile will be used for
restoring the configuration of the selected CPE.
Note: When restoring configuration to a CPE, make
sure the configuration file you selected was backup
from this CPE before. Because restoring from another
device's configuration file may cause serious problem
(e.g., Both devices have different ISP username/
password. Restoring configuration from one CPE to the
other will cause Internet connection not being online).
Firmware Upgrade – It means such profile will be used for
firmware upgrade.
Click Select to locate the file you want to save, restore or
upgrade for CPE.
Vigor2860 series will perform the specified action to the
selected CPE based on the schedule configured here.
Specify one or two schedule profiles (represented by
number) here.
311
Vigor2860 Series User's Guide