Draytek Vigor2860 Series User Manual page 159

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 Series:

Table of Contents

To use Wizard Mode, simple do the following steps:

1. Click the Wizard Mode radio button.

2. Click Index 1. The setting page will appear as follows:

Available settings are explained as follows:

Destination IP

3. Click Next to get the following page.

Available settings are explained as follows:

Any – Any IP can be treated as the source IP.

Src IP Start - Type the source IP start for the specified

WAN interface.

Src IP End - Type the source IP end for the specified

WAN interface. If this field is blank, it means that all the

source IPs inside the LAN will be passed through the WAN

Any – Any IP can be treated as the destination IP.

Dest IP Start- Type the destination IP start for the

specified WAN interface.

Dest IP End - Type the destination IP end for the specified

WAN interface. If this field is blank, it means that all the

destination IPs will be passed through the WAN interface.

Use the drop down list to choose a WAN or LAN interface

or VPN profile. Packets match with the above criteria will

be transferred to the interface chosen here.

Vigor2860 Series User's Guide