Draytek Vigor2860 Series User Manual page 205

Vdsl2 security firewall

Hide thumbs Also See for Vigor2860 Series:

Table of Contents

To set a new profile, please do the steps listed below:

1. Click the number (e.g., #1) under Index column for configuration in details.

2. The configuration page will be shown as follows:

Available settings are explained as follows:

Address Type

Display the profile number that you can configure.

Display the name of the object profile.

Type a name for this profile. Maximum 15 characters are

Choose a proper interface.

For example, the Direction setting in Edit Filter Rule will

ask you specify IP or IP range for WAN or LAN or any IP

address. If you choose LAN as the Interface here, and

choose LAN as the direction setting in Edit Filter Rule,

then all the IP addresses specified with LAN interface will

be opened for you to choose in Edit Filter Rule page.

Determine the address type for the IP address.

Select Single Address if this object contains one IP address

Select Range Address if this object contains several IPs

within a range.

Select Subnet Address if this object contains one subnet

for IP address.

Select Any Address if this object contains any IP address.

Select Mac Address if this object contains Mac address.

Vigor2860 Series User's Guide