Canon imageRUNNER 2530 Service Manual page 102

2
Technology > Embedded RDS > E-RDS Setup > Network settings
Proxy Settings
h. If proxy server is set, move on to Setting/ Registration > System Settings > Network
Settings > TCP/IP Settings > Proxy Settings.
i. Set the Proxy Settings, based on the information obtained under (2) Advance preparations,
Information item 3, described above.
1) Select [ON] in Use Proxy.
2) Select Server Address, and then set the Proxy server address.
Example) proxy.canon.com
3) Enter Port Number.
Example) 80 (1- 65535)
2 Technology > Embedded RDS > E-RDS Setup > Network settings
4) If proxy authentication is required, press [Authentication Settings].
5) Set the Proxy Authentication Settings, based on the information obtained under (2)
•
•
F-2-105 F-2-105
6) Press [OK].
j. Press [Done].
k. Press Reset button to quit the Setting/ Registration.
l. Turn the device power OFF/ ON.
F-2-106 F-2-106
Advance preparations, Information item 4, described above.
Select [ON] in Use Proxy Authentication.
Enter User name and Password, and then press [OK].
2-74
F-2-107 F-2-107
2-74