Replacing Engine Coolant - Honda tourer Owner's Manual

06/09/21 10:52:01 32SED640_434

Replacing Engine Coolant

The cooling system should be
completely drained and refilled with
new coolant according to the time
and distance recommendations in
the maintenance schedule. Only use
genuine Honda All season
Antifreeze/Coolant Type 2.
Draining the coolant requires access
to the underside of the vehicle.
Unless you have the tools and
knowledge, you should have this
maintenance done by a skilled
technician.
1. Open the bonnet.
Make sure the engine and the
radiator are cool to the touch.
Turn the ignition switch to the ON
(II) position. Make sure the DUAL
indicator is off. Set the driver's side
temperature to ''
the ignition and remove the key.
EXPANSION TANK CAP
2. Remove the expansion tank cap.
''. Turn off
Cooling System (Diesel models)
O-RING
BLEEDER PLUG
3. Remove the bleeder plug on the
expansion tank by using the
ratchet.
Maintenance
CONTINUED
431