Removing The Generator - Yamaha YP250R 2005 Service Manual

STARTER CLUTCH AND GENERATOR
1
2
3
EAS00347

REMOVING THE GENERATOR

1. Remove:
• generator cover
NOTE:
Loosen each bolt 1/4 of a turn at a time, in
stages and in a crisscross pattern.
After all of the bolts are fully loosened, remove
them.
2. Remove:
• generator rotor nut 1
• washer
NOTE:
• While holding the generator rotor 2 with the
sheave holder 3, loosen the generator rotor
nut.
• Do not allow the sheave holder to touch the
projection on the generator rotor.
Sheave holder
90890-01701
3. Remove:
• generator rotor 1
(with the flywheel puller 2)
• woodruff key
CAUTION:
To protect the end of the crankshaft, place
an appropriate sized socket between the
flywheel puller set's center bolt and the
crankshaft.
NOTE:
Make sure the flywheel puller is centered over
the generator rotor.
Flywheel puller
90890-01362
5 - 52
ENG