Adjusting The Front Wheel Static Balance - Yamaha YP250R 2005 Service Manual

FRONT WHEEL AND BRAKE DISC
4 - 6
4. Adjust:
• brake disc deflection
M MMM M MMM M M MMM M
a. Remove the brake disc.
b. Rotate the brake disc by one bolt hole.
c. Install the brake disc.
NOTE:
• Install the brake disc with the recessed bolt
holes facing outward. (For front brake disc)
• Tighten the brake disc bolts in stages and in
a crisscross pattern.
Brake disc bolt
12 Nm (1.2 m · kg, 8.7 ft · lb)
LOCTITE
d. Measure the brake disc deflection.
e. If out of specification, repeat the adjustment
steps until the brake disc deflection is within
specification.
f. If the brake disc deflection cannot be
brought within specification, replace the
brake disc.
L LLL L LLL L L LLL L
EAS05480
ADJUSTING THE FRONT WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel or both, the
front wheel static
adjusted.
• Adjust the front wheel static balance with the
brake disc installed.
1. Remove:
• balancing weight(s)
2. Find:
• front wheel's heavy spot
NOTE:
Place the front wheel on a suitable balancing
stand.
CHAS
M MMM M M MMM M M MMM M
®
L LLL L L LLL L L LLL L
balance should
MMM
LLL
be