Removing And Installing Panels - Yamaha LEXI Owner's Manual

Removing and installing pan-
els
The panels shown need to be removed
to perform some of the maintenance
jobs described in this chapter. Refer to
this section each time a panel needs to
be removed and installed.
1 2
1. Panel A
2. Panel B
3. Panel C
Panel A
To remove the panel
1. Remove the windshield by remov-
ing the screws.
Periodic maintenance and adjustment
EAU18773
3
1. Windshield
2. Screw
2. Remove the screws from panel A,
and then pull the panel off.
EAUN2180
1. Panel A
2. Screw
To install the panel
1
1. Place the panel in the original po-
2
1. Panel A
2
2. Projection
3. Hole
2. Install the screws to the panel.
3. Install the windshield by installing
1
Panel B
To remove the panel
1. Open the seat. (See page 6-14.)
2. Remove the screws, and then pull
9-8
sition, with fit the projection on the
panel into the hole.
1
2
3
the screws.
the panel off as shown.
9