NEC Univerge SV8100 Features And Specifications Manual page 1616

Issue 8.01
System Availability
Terminals
None
Required Component(s)
Any Blade
Related Features
None
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup
2 - 1588
Description/Comments
Set up and confirm the basic
configuration data for each blade.
This program represents different
data depending on the blade
installed in the slot. Please refer
the SV8100 Programming Manual
for a more detailed description of
this program.
UNIVERGE SV8100
Assigned Data
1
The assigned data
varies depending on
the blade installed in
the slot. Please refer

to the SV8100
Programming Manual
for a more detailed
description of the
10-03-XX programs.
Universal Slots
Level
2 3