NEC Univerge SV8100 Features And Specifications Manual page 1872

Issue 8.01
5. Press the button on the IP DECT. Hold the 1st call and answer the 2nd call.

6. Talk with ext 101.
7. Use on-hook on the IP DECT to disconnect ext 101.
8. Hold Recall occurs and seizes the 1st call (On hold) on the IP DECT.
9. Talk with ext 100.
To toggle between the 1st call and off-hook signaling (2nd call):
 Program 20-13-54 is set to Enable.
 Program 20-13-06 is set to Automatically.
1. From ext 100 call IP DECT 200 (1st call).
2. Answer on IP DECT 200 and talk with ext 100.
3. From ext 101 Call IP DECT (2nd call).
4. IP DECT receives off-hook signal.
5. Press the button on the IP DECT. Hold the 1st call and answer the 2nd call.

6. Talk with ext 101.
7. Press the button on the IP DECT. Hold the 2nd call and retrieve the 1st call (On hold).

8. Talk with ext 100.
To answer off-hook signaling (2nd call) and 2nd caller disconnect the call:
 Program 20-13-54 is set to Enable.
 Program 20-13-06 is set to Automatically
1. From ext 100 call IP DECT 200 (1st call).
2. Answer on IP DECT 200 and talk with ext 100.
3. From ext 101 Call IP DECT (2nd call).
4. IP DECT receives off-hook signal.
5. Press the button on the IP DECT. Hold the 1st call and answer the 2nd call.

6. Talk with ext 101.
7. Use on-hook on ext 101. A busy tone is heard on the IP DECT.
8. Press the button on the IP DECT and retrieve the 1st call (On hold).

9. Talk with ext 100.
2 - 1844
UNIVERGE SV8100
Wireless DECT (SIP)