Selecting The Color System And The Video Processing System (Scan Mode) - JVC UX-QD90S Instructions Manual

(Continued)
Basic operations
Selecting the Color System
and the Video Processing
System (SCAN MODE)
Before playing back video discs, you need to
select the color system and the video processing
system.
NOTE
• Make sure that the main unit is connected with the
TV using a component video cord when you select
the progressive mode (
1
Press , and then press
.
2
Hold down
2 seconds.
• Currently selected color system and the
video processing system appear on the dis-
play window.
3
Press to select the desired
system.
PAL color system in the interlace
PAL
mode is selected.
PAL color system in the progressive
mode is selected. Make sure that the
PAL PROG .
TV supports PAL progressive video
input (
NTSC color system in the interlace
NTSC
mode is selected.
NTSC color system in the progressive
mode is selected. Make sure that the
NTSC PROG .
TV supports NTSC progressive video
input (
"PAL PROG ." or "NTSC PROG ." gives finer detailed
images than "PAL" or "NTSC".
4
While the selected system is dis-
played, press
19
page 15).
for approximately
page 15).
page 15).
.
For the locations of remote control
buttons, refer to page 16.
NOTE
• Some TVs may not be compatible with the progres-
sive mode. In this case, select "PAL" or "NTSC".
• All progressive TVs and High-Definition TVs
manufactured by JVC are compatible with "PAL
PROG." and "NTSC PROG."
• Before playing back a disc, it is also required to
select the correct "MONITOR TYPE" in the "PIC-
TURE" menu according to the aspect ratio of
your TV ( page 39).
• If you play back an NTSC disc with this setting
set to "PAL" or "PAL PROG.", you can watch the
playback pictures (the disc will be reproduced
using "PAL 60" format), but the TV screen may
rolls over upward and downward rapidly.
• If you play back a PAL disc with this setting set to
"NTSC" or "NTSC PROG.", you can watch the
playback pictures, but the following symptoms
may occur:
• The items on the disc menu will be blurred, and
be shown slightly shifted when highlighted.
• The aspect ratio of the picture may differ from
the original aspect ratio.
• The picture movement is not smooth.
Introduction