Playback Timer - JVC UX-QD90S Instructions Manual

Convenient Functions
13
Press .
• The settings appear in the display window.
Confirm the settings.
14
Press to turn off the main
unit.
• While the recording timer is functioning, the
volume is set to "0" and no sound is pro-
duced from the speakers or headphones.
• The recording timer is available only when
the main unit is turned off.
NOTE
• During operation, you can return to the previous
step by pressing . You can quit the recording
timer settings by pressing
not stored.
Canceling the recording timer
In step 2 on page 47, select the timer number you
want to cancel, and then press
Even when you cancel the recording timer, the set-
ting remains stored.
Activating the recording timer again
In step 2 on page 47, select the timer number you
want to activate, and press
main unit.
Confirming the recording timer
In step 2 on page 47, press
want to quit checking the recording timer, press
.
Changing the recording timer
Set the recording timer again from step 1 on page 47.
NOTE
• When you want to activate two or three recording
timers, leave a blank time of 2 or more minutes
between the ending time of the first recording timer
and the starting time of the second recording timer.
If the blank time is less than 2 minutes, the second
recording timer does not work.
• When the power plug is disconnected or the
power is interrupted, the recording timer settings
may be lost. If the settings are lost, set the clock
and recording timer again.
. The settings are
.
. Then turn off the
repeatedly. If you
For the locations of remote control
buttons, refer to page 46.

Playback Timer

1
Prepare the sound source you
want to play back.
Disc Make sure that a disc is loaded.
( page 22)
Cassette
Insert a cassette tape. (
tape
Radio Preset the radio station whose broadcast
you want to listen to. (
Other Follow the operation manual for the
equipment equipment.
2
Press repeatedly to select
"TIMER1", "TIMER2" or "TIMER3".
Example: When "TIMER2" is selected
Timer number
3
Press .
4
Press ,
the starting time and ending time.
Example: When you want to set the playback
time from 7:00 a.m. to 7:30 a.m.
• You can use the number buttons to set the
playback time. Refer to "Using the number
buttons" ( page 16).
• For setting the clock, refer to steps 2 to 5 in
"Setting the Clock" (
Entering the "hour" →
"minute" →
5
Press or
"ONCE" or "WEEKLY".
ONCE : The playback timer works once.
WEEKLY : The playback timer works weekly
or every day.
6
Press .
(Continued on next page)
page 42)
page 21)
and to set
page 16).
→ Entering the
to select
48