Connecting Other Equipment; Connecting With A Tv - JVC UX-QD90S Instructions Manual

Connecting Other Equipment

Read this section when connecting other audio
equipment to this product.
Audio cord (not supplied)
CAUTION
• Before connecting other equipment, turn off both
the main unit and the equipment.
Connecting with digital equipment
AV amplifier with a built-in
decoder (not supplied)
To an optical digital input
terminal
Other audio
equipment
Optical digital cable
(not supplied)
CAUTION
• For details of signals to be output, refer to "List of
relationships of DIGITAL AUDIO OUTPUT prefer-
ence items and output signal". (
• If the main unit is connected to equipment with a
Dolby Digital decoder, "D. RANGE COMPRES-
SION" setting of "AUDIO" (
abled for sound from the digital audio output of
the main unit.
• Set "3D PHONIC" to "OFF" (
when an external equipment is using a signal
from the OPTICAL DVD DIGITAL OUT terminal
on the main unit.

Connecting with a TV

Supplied video cord
Main unit
CAUTION
• Connect the main unit directly with a TV (or a
monitor) without routing through a VCR. Otherwise
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system and is not a malfunction.)
Main unit
Connecting directly
Also, if the main unit is connected to a TV with a
built-in VCR, there may be picture distortion during
playback.
NOTE
• Before playing back the discs with video output,
you need to select the color system and the video
processing system. Refer to "Selecting the Color
System and the Video Processing System (SCAN
MODE)" ( Page 19).
• You need to set "MONITOR TYPE" in the "PIC-
TURE" menu correctly according to the aspect
ratio of your TV. ( page 39)
page 40)
page 40) is dis-
page 30)
TV
TV
VCR
(or monitor)
14