Battery Caution & Procedures - Cisco BWX 110 User Manual

Battery Caution & Procedures
9.
10.
11.
12.
13.
Battery Caution & Procedures
To reduce risk of injury or fire, follow these instructions when handling a battery.
Warning
1.
2.
3.
4.
5.
6.
7.
8.
BWX 110 Desktop Modem User Guide
1-2
Do not overload wall outlets, power strips, or extension cords. This can cause serious electrical
shock or fire.
Do not place the equipment on an unstable surface. It can fall and cause injury or damage to the
equipment.
Do not disassemble the equipment. Removing covers exposes dangerous voltages or other risks and
also voids the warranty. Incorrect reassembly can cause equipment damage or electrical shock. Only
an authorized repair technician should service this product.
Do not expose the equipment to extreme hot or cold temperatures.
Do not use the equipment under the following conditions:
– When the equipment has been exposed to water or moisture.
– When the equipment has been damaged.
– When the power cord is damaged or frayed.
– When the equipment does not operate properly or shows a distinct change in performance.
Risk of explosion is possible if the battery is replaced with one not supplied by Cisco.
Do not dispose of the battery in a fire. It may explode. Check with the local codes for battery
disposal guidelines.
Do not open or mutilate the battery. The battery contains substances that are toxic, corrosive, or
harmful to humans. If battery substances come in contact with the skin, seek medical help
immediately.
Do not attempt to recharge the battery by any means except per the instructions in this manual.
Remove the battery from the equipment if the equipment is not going to be used for a long period
of time. The battery could leak and cause damage to the equipment.
Exercise care when handling the battery to prevent shorting the battery with conducting materials
such as bracelets, rings, and keys.
Store the battery pack in a dry place, 0 to +40 degrees Celsius.
Dispose of used batteries according to environmental guidelines.
Chapter 1 Safety Information & Battery Procedures
OL-16307-03