Transferring Calls - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Transferring calls

In a SIP call tap the
name along the
bottom line of the
screen.
Call the person to whom the current
call shall be transferred. When you tap
the green call button (not shown), the
call will be transferred.
D14724.09 User guide EX90, TC5.1, January 2013
All contents are copyright © 2010–2013 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90 Using the EX90
... then tap transfer...
The call will now be transferred. This will work irrespective of
who initiated the call.
Note that you may combine transfer with the Hold and
Swap features as much as you want.
This means, for example, that in a call you may:
•
Put your current call on hold and call a second party.
•
Then initiate a transfer of the one on hold to the second
party.
•
You may now disengage yourself by tapping END on your
unit.
Scheduled meetings
17
User guide
The settings Contact us
Now, tap
Contacts to
gain access to
the call lists and
dial field.
www.cisco.com