3 - 10 WT4070/90 Wearable Terminal User Guide
RS309 Scanner
The RS309 connects to the wearable terminal and mounts on the back of either hand using the RS309 glove.
Remove the rubber plug from the wearable terminal interface connector.
1.
Connect the RS309 trigger cable to the back of the RS309.
2.
Connecting Trigger Cable to RS309
Figure 3-8
Connect the end of the RS309 interface cable to the wearable terminal interface connector. If the wearable
3.
terminal is mounted on the arm, connect the cable to the interface connector closest to the wrist.
If the wearable terminal is mounted on the hip, route the interface cable up to the shoulder and down to the
4.
hand that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.
Cable Clip Installation
Figure 3-9
Trigger Connector