1 - 14 WT4070/90 Wearable Terminal User Guide
Routing RS309 Scanner Cable from Hip to Hand
Figure 1-17
Connecting a Scanner
The RS309 and RS409 scanners and the RS507 imager can be used with the wearable terminal. See
Scanner on page 3-10
terminal. Refer to the RS507 Product Reference Guide for procedures for connecting the imager to the wearable
terminal.
Starting the Wearable Terminal
Press the Power button to turn on the wearable terminal. If the wearable terminal does not power on, perform a
cold boot. See
Resetting the Wearable Terminal on page
NOTE When a battery is fully inserted in a wearable terminal for the first time, upon the wearable terminal's first
power up, the device cold boots and powers on automatically.
WT4070/90 Boot Up
When the WT4070/90 is powered on for the first time the splash screen
time followed by the Start Up window on non-touch configurations and the calibration screen on touch enabled
configurations.
and
RS409 Scanner on page 3-8
for procedures for connecting the scanner to the wearable
2-17.
(Figure
1-18) appears for a short period of
RS309