Battery Charging; Led Charge Indications; Speed Led; Link Led - Motorola WT4070 User Manual

Battery Charging

The four slot Ethernet cradle can charge up to four wearable terminals simultaneously. To charge the wearable
terminal:
Slide the wearable terminal into the wearable terminal slot.
1.
The wearable terminal amber Charge Status LED indicates the wearable terminal battery charging status. The
2.
standard capacity battery usually charges in less than four hours and the extended capacity battery fully
charges in less than eight hours. See
When charging is complete, remove the wearable terminal from the cradle.
3.

LED Charge Indications

The Four Slot Ethernet cradle uses the wearable terminal amber Power LED to indicate the battery charging
status. See Table 3-1 on page 3-3

Speed LED

The green Speed LED lights to indicate that the transfer rate is 100 Mbps. When it is not lit it indicates that the
transfer rate is 10 Mbps.

Link LED

The yellow Link LED blinks to indicate activity, or stays lit to indicate that a link is established. When it is not lit, it
indicates that there is no link.

Battery Charging Indicators

The wearable terminal's amber charge LED indicates the status of the battery charging in the wearable terminal.
See Table 1-3 on page 1-8
The standard capacity battery fully charges in less than four hours and the extended capacity battery fully charges
in less than eight hours.
Table 3-1 for charging status indications.
for charging status indications.
for charging status indications.
Accessories 3 - 5