Rs309 Scanner - Motorola WT4000 - Wearable Terminal - Win CE 5.0 Professional 520 MHz User Manual

3 - 10 WT4070/90 Wearable Terminal User Guide

RS309 Scanner

The RS309 connects to the wearable terminal and mounts on the back of either hand using the RS309 glove.
Remove the rubber plug from the wearable terminal interface connector.
1.
Connect the RS309 trigger cable to the back of the RS309.
2.
Connecting Trigger Cable to RS309
Figure 3-8
NOTE There are two interface cables available. The standard interface cable connects the RS309 to the
terminal
mounted on the hip.
Connect the end of the RS309 interface cable to the wearable terminal interface connector. If the wearable
3.
terminal is mounted on the arm, connect the cable to the interface connector closest to the wrist.
If using the extended length interface cable, route the interface cable up to the shoulder and down to the hand
4.
that the scanner mounts on. Attach two cable clips to clothing and secure cable to cable clip.
Cable Clip Installation
Figure 3-9
Connect the RS309 interface cable to the back of the RS309.
5.
Trigger Connector
mounted on the arm. The extended length interface cable connect the RS309 to the
wearable
wearable terminal