Makita HR2450 Instruction Manual page 8

1
2
1. Bit shank
2. Bit grease
1
1. Bit
2. Chuck cover
1
1. Bit
2. Chuck cover
1
1. Action mode changing knob
2. Lock button
8
Installing or removing the bit
001296
Clean the bit shank and apply bit grease before installing the bit.
Insert the bit into the tool. Turn the bit and push it in until it engages.
001297
After installing, always make sure that the bit is securely held in place by trying
to pull it out.
2
To remove the bit, pull the chuck cover down all the way and pull the bit out.
001298
2
Bit angle (when chipping, scaling or demolishing)
003576
The bit can be secured at the desired angle. To change the bit angle, depress
the lock button and rotate the action mode changing knob to the O symbol.
Turn the bit to the desired angle.
2