Ip Phone Startup Verification - Cisco 8831 Installation Manual

Unified ip conference phone

Hide thumbs Also See for 8831:

Table of Contents

IP Phone Startup Verification

If pairing succeeds, the screen reverts to the Wireless Microphones Menu, and the message Mic X Paired

Successfully! displays.

If pairing times out or fails, the status is updated and you can cancel or retry.

Step 5

Press Cancel to revert to the Wireless Microphones Menu.

Step 6

Press Retry to start the pairing process again.

Related Topics

Unpair Wireless Microphone, on page 12

Unpair Wireless Microphone

If you need to connect a wired microphone to the conference station, any wireless microphones must be

unpaired first. You can also use this procedure to unpair a microphone that is no longer in use.

This option is not available if the microphone is connected. To enable the unpair command, place the

Note

wireless microphone in its charger or turn it off.

Procedure

Step 1

Choose Applications > Admin Settings > Wireless Microphones.

Step 2

Select either Wireless Microphone 1 or Wireless Microphone 2.

If the selected channel is paired, the Unpair softkey displays.

Step 3

Press Unpair.

A verification prompt with the options to Cancel or Unpair displays.

Step 4

Press Unpair to continue to unpair the microphone.

The microphone channel's registration information in the base deletes. If you view the microphone channel's

status in phone info menu, the status value and RFID are empty.

Step 5

Press return to revert to the wireless microphones menu and stop the process.

Table of Contents