Samsung DCS Manual page 47

3.40 ASSIGNING STATIONS TO STATION GROUPS
Allows the System Administrator to assign stations to station groups. A station, common bell, and
external amplifier can be in more than one group, but all groups must have the same ring type. There is
a maximum of 48 members per group on the DCS system, 30 members for the DCS 70 and DCS
Compact system and 16 members for the DCS 24.
NOTES:
1. A device for announcement if used, must provide a hookflash and return the call back
to the group.
2. The DCS Compact and DCS 70 Systems have up to a maximum 30 of members in
each group. The DCS 24 system has a maximum of 16 members and the DCS system
has a maximum of 48 members.
3. The DCS 70 will only support a maximum of 10 stations in a group with unconditional
ring.
GROUP TYPES
0 NORMAL GROUP
1 VMAA GROUP
2 UCD GROUP
3 AA GROUP
FEATURE KEY
0 TYPE
1 RING
2 OVERFLOW
3 GRP TRSF
4 WRAP-UP *
5 NEXT PORT
6 MEMBER
* The Wrap timer is not available on the DCS 70 in the program.
RING MODES
0 SEQUENTIAL
1 DISTRIBUTE
2 UNCONDITION All the stations listed in the group will ring, busy stations will receive
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
Page 38
This is the standard station group
Can only have distribute or sequential ringing.
Has a wrap up capability.
Can only have distribute or sequential ringing.
Group type (Normal, VM/AA, UCD)
Ring mode
Overflow time
Group transfer time
Wrap-up time (timer only valid in type = UCD)
Overflow port
Group member (eg., station 202)
The first idle station listed in the group will ring. If the first is busy, the
next idle station will ring.
The first call will ring the first station listed in the group. The next call
will ring the next station listed in the group.
off-hook ring. MAXIMUM 32 STATIONS RINGING.
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to clear previous entry