Samsung DCS Manual page 12

3.4 PROGRAM STATION ANSWER MODE
Allows a System Administrator to change the answer mode of any keyset or add-on module. Each
keyset or add-on module can have its answer mode set to one of the following options:
0. RING: The keyset will ring in one of eight custom ring patterns. Calls are answered by pressing the
ANS/RLS key or by lifting the handset.
1. AUTO: After giving a short attention tone, the keyset will automatically answer calls on the speaker
phone. When a CO line is transferred to a keyset in Auto Answer, the screened portion of the call will be
Auto Answer, but the keyset or add-on module (AOM) will ring when the transfer is made if the user has
not pressed the ANS/RLS key or lifted the handset.
2. VOICE: ANNOUNCE after a short attention tone, callers can make an announcement but the
ANS/RLS key or handset must be used to answer calls.
PROGRAM KEYS
UP & DOWN
KEYPAD
SOFT KEYS
SPEAKER
HOLD
ANS/RLS
ACTION
1. Press TRSF 103
Display shows
2. Dial keyset number (eg., 205) OR
Press UP or DOWN to select keyset OR
Press ANS/RLS to select all Stations
Press RIGHT soft key to move cursor
3. Dial 0, 1 or 2 to change ring mode OR
press UP or DOWN to select ring mode
and press RIGHT soft key to return to
step 2above
4. Press TRSF to store and exit OR
press SPEAKER to store and advance
to next program
Page 3
Used to scroll through options
Used to enter selections
Move cursor left and right
Used to store data and advance to next program
Used to clear previous entry
Used to select ALL
DISPLAY
[201] ANS MODE
RING MODE
[205] ANS MODE
RING MODE
[ALL] ANS MODE
?
[205] ANS MODE
VOICE ANNOUNCE