GPS Mode
3. To select a higher waypoint number (1),
press and release the + (plus) button (2).
To select a lower waypoint number, press
and release the – (minus) button (3).
To fast scroll, press and hold the + (plus)
button or – (minus) button until the desired
waypoint number appears.
4. Press and hold the WP SET button (4) for
about 1.5 seconds, until the waypoint
number and distance to waypoint (5)
flashes. Then release the button.
5. Within 5 seconds, press and hold the WP
SET button again for about 1.5 seconds
until LAT appears above the WP mark. The
compass direction indicator will flash
Northern Latitude (6) or Southern Latitude
(7), indicating the hemisphere. (To switch
to the other hemisphere, press either the +
(plus) button or – (minus) button.)
6. Tap (do not hold) the WP SET button. The
compass direction indicator will stop flashing
and the degree (8) will begin flashing.
82
GPScape System
(6) Northern Latitude
(8) degree
(7) Southern Latitude
7. To select your entry:
• To increase, tap the + (plus) button
• To decrease, tap the – (minus) button.
• To fast change in units of 10, press and
hold the + (plus) button (to increase) or
the – (minus) button (to decrease) until
the desired entry appears.
(6)
(7)
(8)