Honda ARX1500T3DX Owner's Manual page 189

To lubricate and rustproof the inside of the
throttle body, proceed as follows after
confirming that the engine is stopped and
cool.
1. Remove both seats (page 158).
2. Remove the maintenance port cap (1).
3. Insert the spray nozzle of a water-
displacement corrosion-proof lubricant
(without Teflon or molybdenum additives,
such as CRC 6-56 or an equivalent) into
maintenance port (2).
4. Close the throttle.
5. Spray the lubricant into the maintenance
port for 3 seconds.
6. Operate the throttle lever slowly, from fully
ON to fully OFF, three times.
7. Repeat steps 3-6 again.
8. Install the maintenance port cap and make
sure it is tightened securely.
9. Install both seats.
Lubrication
181
Servicing Your Honda