Honda ARX1500T3DX Owner's Manual page 215

• ARX1500T3DX/T3 only: Clean the
turbocharger in the same manner. Over
time, rust may appear on the outside of
the turbocharger. This rust does not affect
the performance of the unit.
4. Wash your PWC with a sponge or a soft
towel.
5. After washing, rinse your PWC thoroughly
with plenty of clean water to remove any
residue. Detergent residue can corrode
alloy parts.
6. Dry your PWC with a chamois or a soft
towel. Leaving water on the surface to air
dry can cause dulling and water spots. As
you dry, inspect for chips and scratches.
Appearance Care
Finishing Touches
Refer to Safety Precautions on page 146.
After washing your PWC, consider using a
commercially available quality fiberglass
marine wax to finish the job. Apply only a
non-abrasive wax made specifically for
marine use. Apply the wax to the hull and
deck according to the instructions on the
container.
If the fiberglass is damaged, see your Honda
PWC dealer.
Servicing Your Honda
207