Honda ARX1500T3DX Owner's Manual page 33

7 ID No. button
8 ID SET button
9 PGM-FI malfunction indicator
lamp (MIL)
Multi-function Display
Selects or changes the ID number (page 41).
Also used to switch the display to the set up
condition of the ID number (page 41).
Enters or cancels the ID number.
Also used to activate the ID lock system.
Flashes when there is some abnormality in the
PGM-FI (Programmed Fuel Injection) system.
Occasionally, depending on the abnormality, engine
revs may be limited to less than 3,000 rpm. In
extreme cases, the engine will stop.
If the indicator flashes, immediately take the
shortest route to land.
If the engine stops, tow your PWC to land.
This indicator is usually off.
Instruments & Controls
25