Table of Contents
Advertisement
Troubleshooting
IMPORTANT: If your fridge appears not to be
operating properly, before contacting the Baumatic
Customer Care Department, please refer to the
checklist below.
My fridge does not appear to be working/there is no
power to my appliance.
o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
hasn't been a power cut or that the fuse hasn't blown).
o Check that the thermostat inside the appliance has not been
turned to the off position.
o Check that your mains supply voltage, corresponds to the
voltage stated on the rating plate of your appliance.
My fridge appears to be performing poorly.
o Check that the appliance isn't overloaded and that food hasn't
been packed too tightly into it.
o The thermostat setting is too low; you should turn the
thermostat up higher.
o Ensure that the door is closing properly and that the door has
not been opened for a prolonged period in error.
o Ensure that there is adequate ventilation for your appliance.
My fridge is noisy.
o The refrigerant gas that circulates the pipework of the appliance
may make a slight noise, even if the compressor is not running.
o If the noise worsens or the appliance gets louder than normal;
check that it is levelled off correctly, that nothing is touching the
rear of the fridge and that nothing placed inside the appliance is
rattling.
A thick ice sheet has formed on the inner back wall of
my fridge.
o Check that food has not been pushed too far back inside the
appliance, so that it is in contact with the inner back wall.
o The formation of ice droplets on the inner back wall does not
indicate a product fault.
24
Advertisement
Table of Contents
