Troubleshooting - Baumatic BR200.3A Instruction Manual

Larder fridge
Hide thumbs Also See for BR200.3A:
Table of Contents

Advertisement

Troubleshooting

o Check that the plug is fully inserted into the power socket.
o Check that there is power to your mains supply (e.g. that there
o Check that the thermostat inside the appliance has not been
o Check that your mains supply voltage, corresponds to the
o Check that the appliance isn't overloaded and that food hasn't
o The thermostat setting is too low; you should turn the
o Ensure that the door is closing properly and that the door has
o Ensure that there is adequate ventilation for your appliance.
o The refrigerant gas that circulates the pipework of the appliance
o If the noise worsens or the appliance gets louder than normal;
o Follow the "Defrosting the refrigerator compartment" section on
Get user manuals:
See SafeManuals.com
IMPORTANT: If your refrigerator appears not to be
operating properly, before contacting the Baumatic
Service Department, please refer to the checklist
below.
My fridge does not appear to be working/there is no
power to my appliance.
hasn't been a power cut or that the fuse hasn't blown).
turned to the off position.
voltage stated on the rating plate of your appliance.
My fridge appears to be performing poorly
been packed too tightly into it.
thermostat up higher.
not been opened for a prolonged period in error.
My fridge is noisy
may make a slight noise, even if the compressor is not running.
check that it is leveled off correctly, that nothing is touching the
rear of the fridge and that nothing placed inside the appliance is
rattling.
Ice has formed on the inner back wall of my fridge
o Check that food has not been pushed too far back inside
the appliance, so that it is in contact with the inner back
wall.
There is water in the base of the fridge or leaking out
of my fridge.
page 13.
22

Advertisement

Table of Contents
loading

Table of Contents