Cisco TelePresence System EX90
Contents
Introduction
SIP settings
The SIP settings let you specify:
•
Your URI.
•
The Default transport layer, this can be set to TCP, UDP,
TLS or Auto.
•
The proxy type can be set to Standard, Alcatel, Avaya,
TANDBERG, Microsoft, Nortel, Experimental, Siemens.
The experimental setting is for testing purposes.
•
Outbound is not used in this version.
•
Proxy discovery can automatic or manual. In the case of
manual the proxy address must be specified by you.
•
Login name and password is required by the VCS.
Be sure to:
•
Tap Save to put settings into effect.
D14724.03
User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90
Using the EX90
32
The settings
The settings
Web interface
nora.dollhouse@supplier.com
User guide
Contact us
www.cisco.com