Call Settings - Cisco EX90 User Manual

Cisco TelePresence System EX90
Contents Introduction

Call settings

The Call settings let you define whether your EX90
shall respond automatically to incoming calls or not.
If you set it to Auto answer On, you may specify a
delay from the moment an incoming call appears
until the unit responds. The delay can be set to 0–50
seconds in one-second steps.
You may also specify:
•
Maximum outgoing and incoming bandwidth.
The two may have different settings.
•
A preferred default call rate different from the
one the unit comes with, if needed.
•
The default call protocol, choose between SIP
and H.323.
Bandwidth and call rates can be set to 128, 384, 512,
768, 1152, 1920, 2560, 3072, 4000 or 6000 kbps.
D14724.03 User guide EX90, November 2010.
All contents are Copyright © 2010 Cisco Systems, Inc. All rights reserved.
Connecting the EX90 Using the EX90
25
The settings The settings Web interface
User guide
Contact us
www.cisco.com