Table of Contents
Advertisement
2nd
In addition to its other functions, the
assign cameras to the Spot monitor.
• OPERATION :
Press
then press camera button of the camera you want displayed on that
Spot monitor. You can assign any one of the 4 cameras to Spot
monitor.
This button freezes the video.
• OPERATION :
Press
selected camera. Press
cameras.
This button enters the Zoom Mode.
• OPERATION :
Press
SET
This button has several functions; it brings up a Popup Menu,
sets selections on the OSD menus and decreases numbers in the
number setup function.
• OPERATION :
Press
selected item from on of the menus.
ESC
This button has several functions; it acts as a "Cancel" button,
clears Cameo selections and increases numbers in the number setup
function.
• OPERATION :
Press
decrease the number.
The Up, Down, Left and Right buttons are used whenever
you need to move the cursor, highlight bar or Cameo window.
• OPERATION :
Press the arrow corresponding to the direction you
want to move.
1
to
4
These buttons are used to make camera selections or enter
numbers as needed.
2nd
2nd
then 1 to select the Spot monitor;
to freeze the video from the currently
ESC
then
to freeze the video from all the
to enter the Zoom Mode.
SET
to enter the Popup Menu or to set a
ESC
to cancel entries, clear the Cameo or to
55
button can be used to
Advertisement
Table of Contents
