Honeywell HXCT4 Installation Manual page 68

• OPERATION : Press
full screen. Pressing another camera button will display that camera
full screen. Press 2nd
previously defined by the user.
PIP (Picture in Picture) inserts a selected camera as a small
image in the main image.
• OPERATION : Press
you want displayed in the insert.
Puts the multiplexer in PIP2 display mode or the second user-
defined display mode
• OPERATION : Press
you want displayed in the insert.
Press 2nd and then
previously defined by the user.
Puts the multiplexer in PIP3 display mode or the third user-
defined display mode
• OPERATION : Press
you want displayed in the insert.
Press 2nd and then
defined by the user.
Puts the multiplexer in 2x2 display mode or the fourth user-
defined display mode
• OPERATION : Press
Press 2nd and then
defined by the user.
Puts the multiplexer in the Sequence Mode.
• OPERATION : Press
while in the PIP1, PIP2 or User-defined Modes 1 to 4. Press
while in the Full-Screen Mode to start or stop a User-defined
sequence.
Press 2nd , and camera buttons 1 to start or stop Spot
Sequences.
and the currently selected camera displays
and then to display a screen layout
and then the camera button of the camera
and then the camera button of the camera
to display the second screen layout
and then the camera button of the camera
to display the third screen layout previously
and 4 cameras display on the screen.
to display the fourth screen layout previously
to start or stop all cameras sequencing
54