Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Honeywell HXCT4
Summary of Contents for Honeywell HXCT4
- Page 1 4-Channel Color Multiplexer HXCT4 / HXCT4X Installation Manual...
- Page 3 WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK).
-
Page 4: Safety Precautions
Safety Precautions Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it any further. Unplug the unit from the wall outlet if it is not going to be used for several days or more. - Page 5 IMPORTANT SAFEGUARDS READ INSTRUCTIONS – Read the safety and operating instructions before operating the unit. RETAIN INSTRUCTIONS – Retain the safety and operating instructions for future reference. CLEANING – Unplug unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- Page 6 11. POWER CORDS – Do not allow anything to rest on the power cord. Do not locate unit or equipment where the cord can be damaged by persons walking on it. 12. HEED WARNINGS – Follow all instructions marked on the unit. 13.
-
Page 7: Fcc Compliance Statement
FCC COMPLIANCE STATEMENT FCC INFORMATION : THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. -
Page 8: Table Of Contents
Table Of Contents Pages Chapter 1 Introduction Features Technical Overview Chapter 2 Installation Required Tools Connecting Cameras Connecting Monitors Connecting VCRs Connection a Mouse Daisy-Chaining and Remote Control Connections Alarms and Other Connections Initial Setup Accessing the Main Menu Main Menu Settings Time, Date Setup Camera Access Setup Camera Title Setup... - Page 9 Motion Detection Index Setup Motion Detection Index List Motion Detection Schedule Setup Motion Detection Sensor Setup Motion Detection Sensor Setup (Normal) Testing Motion Detection Sensor Setup Motion Detection Sensor Setup (Vector) Playback & Recording Setup VCR System Setup Recording Index Setup Camera Picture Adjustment Macro Setup Macro Record Setup...
- Page 10 User Scrn Chg… OSD Change… Screen Protect… Manual Alarm… Alarm Reset Spot Output… Macro User Change… Alarm List… Playback Format… PB Picture Adjust… Appendix A Troubleshooting Appendix B Connector Pin Outs Appendix C Remote Control Remote Control for Daisychained Multiplexers Remote Command Set Functional remote commands Appendix D Specifications...
- Page 11 On-Screen Display (Main) On-Screen Display (Spot) Other Features (Internal) Other Features (External Interface) Remote Control Rear Panel Connectors Front Panel Controls Power Requirements Power Adapter Dimensions Weight Operating Environment...
- Page 12 List of Illustraions Figure 1 — Typical multiplexer system configuration Figure 2 — multiplexer connections Figure 3 — Connecting one VCR to the multiplexer Figure 4 — Connecting two VCRs to the multiplexer Figure 5 — Top menu bar Figure 6 — Supervisor Password screen Figure 7 —...
- Page 13 Figure 33 — VCR System Setup screen Figure 34 — Recording Index Setup screen Figure 35 — Camera Picture Adjustment screen Figure 36 — Macro Setup screen Figure 37 — Macro Record Setup screen Figure 38 — Live screen with M01 REC on the screen Figure 39 —...
-
Page 15: Chapter 1 Introduction
Chapter 1 Introduction < Figure 1 > Typical multiplexer system configuration. Features • Compatible with standard color cameras and other standard video sources • Switchable between NTSC and PAL • Able to decode tapes from many other brands of multiplexers •... -
Page 16: Alarm Action Setup
• Each camera has a programmable 256-target (16 x 16) motion- detection grid • Programmable vector-based motion detection in any direction • Nonvolatile program memory saves all user settings and protects them against power outages • One TTL/CMOS contact closure alarm for each camera •... -
Page 17: Technical Overview
Technical Overview 4 Camera Multiplexing with Motion Detection, Alarm Association and Multilingual Setup Menus multiplexer has revolutionary features not available in most multiplexers. The multiplexer has a sophisticated motion detection system that can sense motion vectors in any direction. Motion detection sensitivity can be adjusted and the user can set day and night motion detection schedules. -
Page 19: Chapter 2 Installation
Chapter 2 Installation Required Tools Although no special tools are required to install the multiplexer, it is only one part of a complex system. Refer to the Installation manuals for the other components in your particular installation for special tool requirements. -
Page 20: Connecting Monitors
Connecting Monitors Your main monitor should be connected to the MAIN output. There are two MAIN connectors; an S-Video and a BNC. If your monitor has an S- Video input, you should use the S-Video MAIN. Up to four auxiliary monitors can be connected to the multiplexer. You can use these as spot monitors or to view live video while playing tapes back through the main monitor. -
Page 21: Connection A Mouse
< Figure 4 > Connecting two VCRs to the multiplexer You can connect one VCR to the multiplexer and use it for both recording and playback. However, the multiplexer can handle recording and playback at the same time, so it is possible to connect two VCRs. One VCR is used to record while the other is used to play back. -
Page 22: Alarms And Other Connections
Alarms and Other Connections The 50-pin ALARM IN/OUT connector has 4 alarm inputs, 4 alarm outputs, RS-232 connectors, VCR trigger pulse and various alarm settings. See Appendix B — Connector Pin Outs for further details on how to make these connections. Initial Setup Setting up for NTSC or PAL Operation NOTE : When changing the multiplexer to NTSC or PAL all other settings... -
Page 23: Figure 6 - Supervisor Password Screen
To access the Main Menu of the setup screens, move the cursor to the top of the screen. The top menu bar appears. Select Setup. < Figure 6 > Supervisor Password screen. Enter the password by moving the cursor over the desired number and clicking on it. -
Page 24: Main Menu Settings
Main Menu Settings < Figure 7 > Main Menu screen. < Figure 8 > Time, Date Setup, first screen. -
Page 25: Time, Date Setup
Time, Date Setup In addition to setting the multiplexer’s time and date, these screens can be used to set the format and select daylight saving time. You can use the arrow buttons on the multiplexer or mouse to select the menu item. Press SET or the left mouse button to decrease the number. -
Page 26: Figure 9 - Time, Date Setup, Second Screen
< Figure 9 > Time, Date Setup, second screen. • Daylight Saving : If you are in an area that does not have Daylight Saving (Summer) Time, set this option to Off. When you set this selection to On, you must set the start and stop dates and times. •... -
Page 27: Camera Access Setup
Camera Access Setup < Figure 10 > Camera Access Setup screen. The Camera Access Setup screen allows you to assign which cameras different users will have access to and which cameras can be displayed on the Spot (auxiliary) monitors. You can also designate whether a camera can be recorded. -
Page 28: Camera Title Setup
Camera Title Setup < Figure 11 > Camera Title Setup screen. The Camera Title Setup screen allows you to enter titles for each camera. Clicking on the letters and characters enters them in the camera title. Each camera title can have a maximum of 24 characters. •... -
Page 29: Camera Sequence Setup
• Keyboard Character Set 1 : A to Z (upper case) • Keyboard Character Set 2 : a to z (lower case) • Keyboard Character Set 3 : BLANK ! " # $ % & ' ( ) * +, - . / 0 to 9 •... -
Page 30: Alarm Setup
Enter the camera number under the Camera column and the display time under Dwell. You can also set the Stack Dwell Time, which is the length of time each group of cameras will display. • Exit : Saves your changes and returns to the Main Menu. Alarm Setup <... - Page 31 • Alarm Dwell Time : The dwell time can be set from 1 to 99 seconds. (The screen will automatically sequence in a multi-alarm condition.) • Alarm I/O Setup : Enters the Alarm I/O Setup submenu. • Alarm Action Setup : Enters the Alarm Action Setup submenu.
-
Page 32: Alarm I/O Setup
Alarm I/O Setup < Figure 14 > Alarm I/O Setup screen. You can set the input and output for each of the alarm connections. • In : Can be set to NO (Normally Open), NC (Normally Closed) or Off. • Out : Can be set to AH (Active High) or AL (Active Low) TTL output. -
Page 33: Figure 15 - Alarm Action Setup (1) Screen
Alarm Action Setup (1) < Figure 15 > Alarm Action Setup (1) screen. This screen allows you to set up the actions the multiplexer will take when there is an alarm condition. • Buzzer : When set to On, the multiplexer’s internal buzzer will sound during an alarm condition. -
Page 34: Figure 16 - Alarm Action Setup (2) Screen
• Recording : This allows you to select how video will record during an alarm condition. INT interleaves images from the camera with an alarm every other field giving you more images from that camera. When there are multiple alarms, the cameras with alarms are interleaved. - Page 35 This screen allows you to set the actions the operator can take, what relays will be activated and what cameras are associated with other cameras. • Action : There are three possible settings. Timed: The alarm will “time out” at the designated time (Hold Time) unless the operator clears it earlier.
-
Page 36: Associated Camera Setup
Associated Camera Setup < Figure 17 > Associated Camera Setup submenu. This menu allows you to associate up to three cameras with another when an alarm condition occurs. The main camera is displayed in the top window with the three associated cameras shown below. Under each of the associated camera windows is a control bar. -
Page 37: Figure 18 - Motion Action Setup (1) Screen
Motion Action Setup (1) < Figure 18 > Motion Action Setup (1) screen. This screen allows you to set up the actions the multiplexer will take when there is a motion alarm condition. • Buzzer : When set to On, the multiplexer’s internal buzzer will sound during a motion alarm condition. -
Page 38: Figure 19 - Motion Action Setup (2) Screen
• Recording : This allows you to select how video will record during a motion alarm condition. INT interleaves images from the camera with an alarm every other field giving you more images from that camera. When there are multiple alarms, the cameras with alarms are interleaved. -
Page 39: Video Loss Action Setup
This screen allows you to associate various relays and links to the cameras in motion alarm conditions. • Relay : There are four possible relay settings. 1 or 2: Sets either internal relay 1 or 2 to be activated by a motion alarm. 1&2: Sets both internal relays 1 and 2 to be activated by a motion alarm. - Page 40 • Buzzer : When set to On, the multiplexer’s internal buzzer will sound during a video loss condition. • Alarm Screen : When set to On, the screen display will change to the one defined in the Alarm Screen Format menu during a video loss condition.
-
Page 41: Figure 21 - Manual Alarm Action Setup (1) Screen
Manual Alarm Action Setup (1) < Figure 21 > Manual Alarm Action Setup (1) screen. This screen allows you to set up the actions the multiplexer will take when there is a Manual alarm condition. • Buzzer : When set to On, the multiplexer’s internal buzzer will sound during a Manual alarm condition. - Page 42 • Recording : This allows you to select how video will record during a Manual alarm condition. INT interleaves images from camera with an alarm every other field giving you more images from that camera. When there are multiple alarms, the cameras with alarms are interleaved.
-
Page 43: Figure 22 - Manual Alarm Action Setup (2) Screen
Manual Alarm Action Setup (2) < Figure 22 > Manual Alarm Action Setup (2) screen. This screen allows you to set the actions the operator can take, what relays will be activated and what cameras are associated with other cameras. •... -
Page 44: Macro Link Setup
• <Back : This takes you to the Manual Alarm Action Setup (1) submenu. • Exit : Saves your changes and returns to the previous menu. Macro Link Setup < Figure 23 > Macro Link Setup screen. This screen allows you to link macros to the 4 alarms. Each alarm can be set to Off or linked to any of 4 macros. -
Page 45: Alarm History
Alarm History < Figure 24 > Alarm History List screen. This screen displays a list of alarms. The multiplexer retains a history of up to 256 events. • << : Goes to the first page in the history list. • < : Goes back one page in the history list. -
Page 46: Motion Detection Setup
Download the "Download.exe" file on your PC. Implement the "Download.exe" file and click the icon named "Print Program". Now user's are ready to use "Print" function. • Exit : Saves your changes and returns to the Main Menu. Motion Detection Setup <... -
Page 47: Motion Detection Index Setup
Motion Detection Index Setup < Figure 26 > Motion Detection Index Setup screen. Normally, the multiplexer gives equal priority to all cameras (1 to 4) for motion detection. However, it is possible to change the priorities. • + : Increases the camera number by one. •... -
Page 48: Motion Detection Index List
Motion Detection Index List < Figure 27 > Motion Detection Index List screen. This screen displays the priorities assigned to the cameras. You cannot edit anything on this screen. • Exit : Returns to the previous menu. -
Page 49: Motion Detection Schedule Setup
Motion Detection Schedule Setup < Figure 28 > Motion Detection Schedule Setup schedule. multiplexer can be set up to detect or ignore motion based on a schedule. For example, you would expect lots of activity during normal office hours and do not want to detect motion. However, when the office is closed, motion should generate an alarm condition. -
Page 50: Motion Detection Sensor Setup
Motion Detection Sensor Setup < Figure 29 > Motion Detection Sensor Setup screen. Each camera can be set up with two sets of motion detection parameters. The parameter sets are defined as Mode 1 and Mode 2. (You can schedule when the modes will be used in the Motion Detection Schedule Setup screen.) •... - Page 51 • Trigger Size (H) : This is the minimum number of targets in a horizontal row that must change before the multiplexer reads the change as motion. The range is 01 to 16. • Trigger Size (V) : This is the minimum number of targets in a vertical row that must change before the multiplexer reads the change as motion.
-
Page 52: Motion Detection Sensor Setup (Normal)
Motion Detection Sensor Setup (Normal) < Figure 30 > Motion Detection Sensor Setup (Normal) screen. The Motion Detection Sensor Setup screen is used to setup and test cameras for motion detection. Mode 1 and Mode 2 can be set up for either Normal or Vector motion detection. -
Page 53: Testing Motion Detection Sensor Setup
Testing Motion Detection Sensor Setup < Figure 31 > Motion Detection Sensor Setup test screen. The Motion Detection Sensor Setup test screen shows when the multiplexer detects motion by drawing a box around the active area. This gives you instant feedback letting you know if you have set the correct size and sensitivity for the types of motion you want to detect. -
Page 54: Motion Detection Sensor Setup (Vector)
Motion Detection Sensor Setup (Vector) The Vector Motion Detection Sensor Setup screen is the same as the Normal Motion Detection Sensor Setup screen except that it has two motion grids. To detect left to right motion, you define the first grid and then define a second grid to the right of the first. -
Page 55: Vcr System Setup
VCR System Setup < Figure 33 > VCR System Setup screen. The VCR System Setup screen is used to synchronize the multiplexer with your VCR. NOTE : If your VCR has a synchronizing trigger pulse, using it will save you a lot of time when setting up your system. •... -
Page 56: Recording Index Setup
• Normal & Alarm Record : If you selected a VCR from the list, all you need to set is the hours. If you selected User Define, you need to set the hours and field delay. Although you can set Normal and Alarm hours the same, you usually want higher quality video in an alarm situation. -
Page 57: Camera Picture Adjustment
• Delete : Deletes the highlighted camera from the array. • Insert : Inserts a blank into the array. • End : Enters an “E” which sets the end mark for the index list. • View : Displays the Motion Detection Index List. •... - Page 58 The following adjustments have a default setting of 00. The other values are Min = minimum, 127 to -01 = adjustments below default, 01 to 127 = adjustments above default, and Max = maximum. • Contrast : Adjusts contrast. • Color : Adjusts color.
-
Page 59: Macro Setup
Macro Setup < Figure 36 > Macro Setup screen. The Macro Setup screen lets you access the two macro setup submenus. • Macro Recording Setup : Opens the submenu. • Macro Schedule Setup : Opens the submenu. • Exit : Saves your changes and returns to the Main Menu. -
Page 60: Macro Record Setup
Macro Record Setup < Figure 37 > Macro Record Setup screen. Selecting any of the Record Start buttons takes you to a live screen where all of your key strokes or mouse operations except for password protected operations will be recorded as a macro. •... -
Page 61: Macro Schedule Setup
< Figure 38 > Live screen with M01 REC on the screen. Macro Schedule Setup < Figure 39 > Macro Schedule Setup screen. -
Page 62: Unit Setup
You can create up to 20 event schedules that use macros. • Event : Scheduled event number; 01 through 20 • On/Off : Turns the selected event On or Off. • Macro : Selects the macro that that event is to perform. •... - Page 63 • Mouse : If you plan to use a mouse to control you multiplexer, set this to On. • Key lock : When On, pressing any key or clicking the mouse will open a screen asking for a password. • Factory Reset : Returns all settings to the factory default.
-
Page 64: Password Setup
Password Setup < Figure 41 > Passwords Setup screen. NOTE : Keep a copy of the supervisor password in a safe place. Once you have changed the supervisor password from the factory default, you will not be able to access protected menus without it. The Password Setup screen allows you to assign PIN codes to the supervisor and up to four users. -
Page 65: Assigning Passwords
Assigning Passwords < Figure 42 > Passwords entry screen. Use the numbers to enter a four-digit PIN. • Clear : Deletes all entered numbers, and you can restart entry. • OK : Opens the re-enter screen after the first try. Compares the entry to the first password, and exits the Setup Menu if they match. -
Page 67: Chapter 3 Operation
Chapter 3 Operation < Figure 43 > Front Panel. Buttons and Their Functions Allows the operator to generate an alarm. When pressed along with a camera button, it places that camera in the alarm mode. • OPERATION : Press and then a camera button. Pressing this button switches the multiplexer into VCR playback mode or VCR preview mode. - Page 68 • OPERATION : Press and the currently selected camera displays full screen. Pressing another camera button will display that camera full screen. Press and then to display a screen layout previously defined by the user. PIP (Picture in Picture) inserts a selected camera as a small image in the main image.
- Page 69 In addition to its other functions, the button can be used to assign cameras to the Spot monitor. • OPERATION : Press then 1 to select the Spot monitor; then press camera button of the camera you want displayed on that Spot monitor.
-
Page 70: Menu Operation
Menu Operation The multiplexer takes advantage of On-Screen Display (OSD) menus. You can navigate through these menus using a mouse or the arrow buttons. There are two main menus: Top and Bottom. The Top Menu is accessed by moving the cursor to the top edge of the screen. The Bottom Menu is accessed by moving the cursor to the bottom edge of the screen. -
Page 71: Live Screen
The bottom menu is only available in the Live Mode. It has ten selections. • Full : Switches to full screen display of one camera. • PIP1~PIP3 : Switches to a display with a Picture-in-Picture • 2x2 : Switches to four cameras displayed on the screen. •... -
Page 72: Pop Up Menu
Pop Up Menu < Figure 47 > Pop Up Menu Clicking the right mouse button or pressing the SET button cause the Pop Up menu to appear. There is a list of ten items that can be selected from the Pop Up menu. •... -
Page 73: Live Camera Change
Live Camera Change < Figure 48 > Live Cam Change menu The Live Camera Change menu allows you to assign any camera to active cameo. • 1 to 4 : Selecting these buttons changes the cameo camera. • Cancel : Exits the menu without any changes. -
Page 74: Vcr Camera Change
VCR Camera Change < Figure 49 > VCR Cam Change menu This menu will appear on the Pop Up menu only when the unit is Playback mode. The VCR Camera Change menu allows you to assign any camera to active cameo. •... -
Page 75: Zoom
Zoom < Figure 50 > Zoom Screen. The digits on the top right of the screen indicate the amount of zoom. The maximum zoom is 32 times. The picture insert at the bottom right shows the entire seen with a rectangle representing the zoomed area. -
Page 76: Full
Full Clicking Full on the Pop Up menu causes the active camera to display full screen. Priority On When Priority is set to On for a camera, it will display in real time, and the refresh rate of the other cameras will slow down. Histogram Equalizer <... -
Page 77: Panic Record On
OFF : Cancels any Histogram Equalizer settings and returns the • image contrast to the original value. Cancel : Cancel exits the menu without any changes. • Panic Record On When Panic Record is selected only the selected camera is recorded, and it records in real-time speed. -
Page 78: Utilities
The Sequence selection displays the sequence menu. Turn All Cam Seq On : This selection starts sequencing all cameras • that are not currently displayed on the screen. Turn User Set Seq On : This selection starts a sequence that was •... -
Page 79: Figure 55 - Select A Screen Menu
This opens the User Screen Change menu. This menu allows the user to select one of four displays that were defined in the Bottom Menu. After selecting one of the UserDef buttons, the Select a Screen menu appears. < Figure 55 > Select a Screen menu. <<... -
Page 80: Osd Change
OSD Change... < Figure 56 > OSD Setup screen. The OSD Setup screen allows you to select what text will be display and what color the text will be. Border Line : The border around the images. • Lv Cam Number : The live camera’s number. -
Page 81: Screen Protect
Alarm Text : When an alarm occurs, an “A” displays on the screen. • Motion Text : When motion is detected, an “M” displays on the • screen. Freeze Text : When an image is frozen, an “F” displays on the •... -
Page 82: Spot Output
Spot Output... < Figure 57 > Spot output change screen. This feature allows the user to assign different cameras to the spot monitors. Macro This feature allows the user to select which macro will play. User Change... < Figure 58 > User Change menu. -
Page 83: Alarm List
Selecting Supervisor or one of the user numbers opens a password screen allowing that user to log on. The Supervisor has access to all the menus and setup features. Users can be assigned different levels of access. For example some users might not be able to view certain cameras. -
Page 84: Playback Format
< Figure 60 > Select Format menu.. Your multiplexer can play back tapes that were recorded using different multiplexers. This menu allows you to choose from HONEYWELL, ULTRAK Legacy Color, ULTRAK Legacy B/W, Dedicated Micros, Robot (Sensormatic), Pelco and Kalatel (Impac). PB Picture Adjust... -
Page 85: Appendix A Troubleshooting
Appendix A Troubleshooting Problem Try This No Video (black screen) Check power connections No Video (one camera) Check camera power and coaxial cable No Video (jumbled colors) Make certain multiplexer is set correctly for your system (NTSC or PAL) Fuzzy Image (one camera) Check camera focus Bad Video (one camera) Check the loop through connector. -
Page 86: Appendix B Connector Pin Outs
Appendix B Connector Pin Outs multiplexer has a 50-pin connector used for alarm input and output, RS-232 network connections, VCR trigger pulse, and updating the multiplexer’s firmware. A sub-board is supplied to simplify connections. See the illustration below for connection details. <... -
Page 87: Figure 62 - Rs-485 Connector
< Figure 62 > RS-485 Connector NOTE : If termination of RS-485 network is required, short pin 3 and pin 4. -
Page 88: Appendix C Remote Control
Appendix C Remote Control Remote Control for Daisychained Multiplexers If you are using a computer to control two or more daisy-chained multiplexers, you need to send a re-address command to select the multiplexer to control. (Up to 16 multiplexers can be daisy-chained.) Re-address commands are not printable characters;... -
Page 89: Remote Command Set
Remote Command Set Simple three-character ASCII commands represent single or combination front panel button presses on the multiplexer. The effect of a button press or remote command depends on the multiplexer’s current status. Check the multiplexer’s current status before issuing a remote command. -
Page 90: Functional Remote Commands
Functional remote commands RESULTS RESULTS Panic record (camera 1) Select camera 1 for display Panic record (camera 2) Select camera 2 for display Panic record (camera 3) Select camera 3 for display Panic record (camera 4) Select camera 4 for display Stop panic record Up (press &... -
Page 91: Appendix D Specifications
Appendix D Specifications Operating Defaults Display Format 2x2 multi-screen format Operation Mode Live Factory Defaults Date Format US (MM/DD/YY) Time Format 24-hour Clock Source Internal clock Daylight Saving Camera Access All cameras ON Cameras to Record All cameras ON Stack Dwell Time 3 seconds Sequence Dwell Time 3 Seconds... - Page 92 Motion Alarm Recording INT (Interleaving) Motion Alarm Spot Monitor Output Motion Alarm Action Timed Out Motion Alarm Relay Motion Alarm Link Vloss Buzzer Vloss Screen Vloss Network Relay Vloss Massage Latch Vloss Spot Monitor Output Vloss Hold Time 20 Seconds Manual Alarm Buzzer Manual Alarm Screen Manual Alarm Network Relay...
- Page 93 Camera Contrast Camera Brightness Camera Color Camera Tint Language English Mouse Key Lock Camera Number Offset Master/Slave Slave Network Type RS232 Baud Rate 1200 Unit Address Protocol Setup Menu Password User Change Password Password Code User1 (1111) User2 (2222) User3 (3333) User4 (4444) Supervisor (5555) VCR Picture Adjustment...
-
Page 94: Video Format
Video format NTSC/PAL Standard Video Level Camera Inputs 1.0Vp-p, 75 Ohms Camera Outputs 1.0Vp-p, 75 Ohms Loop through Output 1.0Vp-p, 75 Ohms VCR Input: Composite 1.0Vp-p, 75 Ohms VCR Input: S-Video Luma 1.0Vp-p, 75 Ohms Chroma (burst) 0.286Vp-p, 75 Ohms Main Output: Composite 1.0Vp-p,75 Ohms Main Output: S-Video... -
Page 95: Sampling Standard
Sampling Standard Y:Cb:Cr CCIR 601 (4:2:2) Gray Scale 256 levels Color 16 million (True Color) Video Memory Main Display 64Mbit SDRAM VCR Output 64M/16Mbit SDRAM Refresh Rate (fields/sec.) Full PIP format (Main) PIP format (inset) Squish Split format (1-2 cameras) Split format (3-4 cameras) 60/number of cameras Zoom... -
Page 96: Motion Detection
Motion Detection Activity Grid (16 x 16 grids) Activity Detection Intrusion Detection Motion Vector Sensing (any direction) Sensitivity Levels 01-16 Motion Delay Time 0 to 5 Seconds Motion Hold Time 1 to 99 Seconds Day & Night Modes (2 setup modes) Interleaving (VCR Out) Motion Tracking Box (on screen Setup &... -
Page 97: On-Screen Display (Main)
Alarm History Logging 256 events Alarm History Printout via RS232 Link Alarms to Macro Link Alarms to VMD External Alarm Relay Box 4 relays via RS485 On-Screen Display (Main) Camera Title 24 characters Time & Date U.S., Asia, European 12/24-hour format Alarm Message Motion Message Video Loss Message... -
Page 98: Other Features (External Interface)
Time-lapse VCR Setup (field delay selectable) 2 hr real-time to 960 hr time-lapse Video Loss Detection Factory Reset Unit ID Number 1 to 255 Picture Adjust (Live, Playback) Macro (1 per camera) Macro Scheduler Camera Number Offset 1 to 256 Multilingual Menu English, German, French, Italian, Spanish,... -
Page 99: Front Panel Controls
VCR Out (Y/C) 1 4-pin mini DIN Alarm Input/Output Terminal block RS232 (RX/TX) Terminal block RS485 (RX/TX) 2 RJ45 Spot (Aux) Out 1 BNC Power 2.1mm pin type; female P/S2 Mouse Port 1 5-pin mini DIN Front Panel Controls Manual Alarm Macro Panic Record Full... -
Page 100: Dimensions
Dimensions Unit Size 17"W x 1.73"H x 12.2"D 432W x 44H x 310D mm Shipping Size 26"W x 4.8"H x 15.5"D 660W x 123H x 393D mm Weight Unit Weight 5.3 lbs (2.4 Kgs) Shipping Weight 9.5 lbs (4.3 Kgs) Operating Environment Ambient Temperature 32°... - Page 102 All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell Video Systems. The information in this publication is believed to be accurate in all respects. However, Honeywell Video Systems cannot assume responsibility for any consequences resulting from the use thereof.