Table of Contents
Advertisement
Motion Action Setup (1)
< Figure 18 > Motion Action Setup (1) screen.
This screen allows you to set up the actions the multiplexer will take
when there is a motion alarm condition.
• Buzzer :
When set to On, the multiplexer's internal buzzer will sound
during a motion alarm condition.
• Alarm Screen :
When set to On, the screen display will change to the
one defined in the Alarm Screen Format menu during a motion alarm
condition.
• Network Relay :
When set to On, the multiplexer sends the alarm
information to an external relay box via the network during a motion
alarm condition.
• Message Latch :
When set to On, an "M" displays on the screen
when a motion alarm condition occurs. It remains on the screen until
it is cleared.
23
Advertisement
Table of Contents
