Table of Contents
Advertisement
Alarm Action Setup (1)
< Figure 15 > Alarm Action Setup (1) screen.
This screen allows you to set up the actions the multiplexer will take
when there is an alarm condition.
• Buzzer :
When set to On, the multiplexer's internal buzzer will sound
during an alarm condition.
• Alarm Screen :
When set to On, the screen display will change to the
one defined in the Alarm Screen Format menu during an alarm
condition.
• Network Relay :
When set to On, the multiplexer sends the alarm
information to an external relay box via the network during an alarm
condition.
• Message Latch :
When set to On, an "A" displays on the screen when
an alarm condition occurs. It remains on the screen until it is cleared.
19
Advertisement
Table of Contents
