Fcc And Industry Canada Information - RCA ATSC21 User Manual

Chapter 5: Additional Information
Troubleshooting,
No color, or wrong colors.
• If you're using a component video cable to connect your tuner to your monitor, make sure that you've connected the ends properly
(the cable connected to the Y jack on the tuner should be connected to the Y jack on your monitor; the cable from the tuner's Pr jack
should connect to the monitor's Pr jack, Pb to Pb).
The Info Banner (or Digital Captions Info screen) says that captions are available, but I don't see any on my screen.
• The Info Banner and the Digital Captions Info screen depend on the broadcaster to indicate whether (and what types of) digital
captions are available. It is possible for the Info Banner and Digital Captions Info screen to indicate that captioning is available when,
in fact, it is not. Likewise, the languages or formats shown as available in the Info Banner or Digital Captions Info screen may not
match what is actually available in the transmitted material.

FCC and Industry Canada Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.
Trade Name:
Model(s):
Equipment Classification:
Responsible Party:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
This Class B digital apparatus complies with Canadian ICES-003.
30
continued
RCA
ATSC21
Receiver subject to part 15
Thomson Inc.
10330 N. Meridian St.
Indianapolis, IN 46290
Telephone (580) 634-0151