Chapter 2: Using The Remote Control Remote Control Buttons - RCA ATSC21 User Manual

Chapter 2: Using the Remote Control
LED
��� ������
��� ��������� ���
����
�
���
����
�������
�����
��
����
2 3
1
4 5 6
8
7 9
����� �������
0
������� ���� �������
������ ����
�������
���
�������
12
Remote Control Buttons
These two pages give you a quick review of the buttons on your remote control.
Before the HDTV Tuner's remote control can operate your TV, VCR, DVD player, satellite
receiver, cable box or audio receiver, you must first program the remote control to
��
operate that device. See Programming the Remote Control later in this section.
(0-9) Number Buttons Press the number buttons to tune to a channel.
��������
ADD/DEL Press this button in HD TUNER mode to add or delete the HDTV Tuner's
currently tuned channel to/from the current input's channel list. For more information,
go to page 19.
������
ANTENNA Switches between off-air and cable inputs in HD TUNER mode. If
programmed, switches between TV and VCR signals in VCR mode (for some VCR brands),
or between TV and satellite receiver signals in SAT•CABLE mode (for RCA satellite
receivers).
Arrows (up, down, left, right) Used to move through the HDTV Tuner's menu system
and program guides.
CAPTION While you're watching the HDTV Tuner, press this button to select from the
��������
available closed-captioning services (for digital channels), closed-captioning modes (for
����
analog channels), or to turn closed-captioning off. See page 26 for more information on
the types of closed-captioning available.
CH+/- Changes channels on your HDTV Tuner or, if the remote control has been
programmed, your TV or VCR. This button also works as a chapter/track skip button on
some DVD players and audio components.
CLEAR Removes any menu or display from the screen and returns you to normal
viewing.
�����
FAV CH+ Press this button to go the next channel in your Favorite Channel list. See
page 19 for information on how to set up and manage your Favorite Channel list.
FORMAT Cycles through the screen formats available for your display type. See page
27 for more information.
FREEZE While you're watching programming from your HD tuner, press this button to
take a still picture of the TV screen. Press FREEZE again (or change channels) to return
to normal viewing (please note that you won't see the part of the program you missed
while the picture was frozen).
GO BACK Returns you to the previous channel.
GUIDE In HD TUNER mode, pressing this button once displays the HDTV Tuner's on-
�����
screen program guide. Press GUIDE again to clear the guide from the screen.
HD TUNER Puts the remote in HDTV Tuner mode so that it operates your HDTV Tuner
������
(e.g. to change channels, access the guide, or get information about a program).
This button also turns the HDTV Tuner on. Your remote control does not need to be
programmed to operate your HDTV Tuner.
INFO Displays the info banner for the current program. In the HDTV Tuner's menu system,
pressing this button gives you more information about the currently highlighted item.
INPUT In TV mode (if the remote is programmed to control your TV), this button toggles
through the TV's available input sources. This button does not work with all brands of TVs.
LED (Light-Emitting Diode) This light is illuminated with each valid button press. When
programming the remote control, it flashes or turns on or off to indicate programming
status. This light flickers if you press a button while the remote batteries are low.
MENU In HD TUNER mode, accesses the HD tuner's on-screen menu. This button also
returns you to the previous menu within the menu system.
MTS (Multitrack Television Sound) Press this button to select from the available
audio tracks for the program you're watching.
Illustrations contained in this document are for representation only.