Saving Edited Print Data - Hitachi PXR-D Instruction Manual

Operations for
modifying the setting
contents
(See Section 2.1.3,
Operations for
modifying the setting
contents. )
If the cursor is not
displayed, press
Show cursor .
Keybord display has
been set to one of the
follwing settings:
"When KANA and
dedicated characters
can be input."
Dedi-
ABC
Kana
Arabic
1 2 3
cated
(The "Arabic input" be
unable to do in "Simple
Chinese".)
"When special
characters can be
input."
Spe- Spe-
ABC
Arabic
cial 1 2 3 cial2
3-47

Saving Edited Print Data

3.8 Saving Edited Print Data
(1) Overview
¡You can save edited print data.
¡Registration numbers are automatically assigned to print data.
¡No duplicate message names can be assigned.
(2) Operating procedure
¡Saving data under the message name of "ABC"
1 From the "Print description" screen, press Save message .
Print line
setup
The system then returns you to the "Save message" screen.
Save message
Message name
Save message as (name) :
Kana
1 2
Shift Shift
2 Press A , B , and C in sequence.
The message name field then reads "ABC".
3 Press OK .
The system then saves the data and returns you to the "Print description"
screen.
¡ Pressing Cancel causes the system to return to the "Print description"
screen without saving the data.
Save message
Message name
Save message as (name) :
Edit Print
Print
spec.
message format
Status: Ready
2011.07.07 12:45
ABC
1 2 3
3 4 5 6 7
2011.07.07 12:45
Message number : 01
Select Save
Menu
message message
Com=0
Start
up
Manual
Insert Delete
8 9 0
Cancel
Back-
Space
space
Status: Ready Com=0
Start
up
Manual
Shut
down
Comm
On/Off
OK
Shut
down
Comm
On/Off