Makita 8270D Instruction Manual
Cordless percussion-driver drill
Hide thumbs
Also See for 8270D:
- Instruction manual (57 pages) ,
- Instruction manual (29 pages) ,
- Instruction manual (49 pages)
Related Manuals for Makita 8270D
Summary of Contents for Makita 8270D
- Page 1 INSTRUCTION MANUAL Cordless Percussion-Driver Drill 8270D 8280D 8390D 005599 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
-
Page 2: Specifications
Wear ear protection. ENG203-1 Vibration vibration total value (tri-axial vector sum) For Model 8270D determined according to EN60745-2-1: ENG102-2 For European countries only Work mode: impact drilling into concrete Noise Vibration emission (a ) : 9 m/s h,ID The typical A-weighted noise level determined according Uncertainty (K) : 1.5 m/s... - Page 3 Makita Corporation responsible Electrical safety manufacturer declare that the following Makita Power tool plugs must match the outlet. Never machine(s): modify the plug in any way. Do not use any Designation of Machine: Cordless Percussion-Driver adapter plugs with earthed (grounded) power Drill tools.
- Page 4 Do not expose power tools to rain or wet power tool will do the job better and safer at the conditions. Water entering a power tool will rate for which it was designed. increase the risk of electric shock. 18. Do not use the power tool if the switch does Do not abuse the cord.
-
Page 5: Specific Safety Rules
ENC004-1 parts. This will ensure that the safety of the power tool is maintained. IMPORTANT SAFETY 29. Follow instruction lubricating INSTRUCTIONS changing accessories. 30. Keep handles dry, clean and free from oil and grease. FOR BATTERY CARTRIDGE GEB003-4 Before using battery cartridge, read all SPECIFIC SAFETY RULES instructions and cautionary markings on (1) DO NOT let comfort or familiarity with product... -
Page 6: Functional Description
Let a hot battery cartridge cool down before when released. charging it. To start the tool, simply pull the switch trigger. Tool Charge the Nickel Metal Hydride battery speed is increased by increasing pressure on the switch cartridge when you do not use it for more than trigger. -
Page 7: Operation
ASSEMBLY damaged. Do not use the speed change lever while the tool is • running. The tool may be damaged. CAUTION: Selecting the action mode Always be sure that the tool is switched off and the • battery cartridge is removed before carrying out 1. -
Page 8: Maintenance
Nominal diameter of wood screw Recommended size of pilot hole any other maintenance or adjustment should be (mm) (mm) performed by Makita Authorized Service Centers, 2.0 - 2.2 2.2 - 2.5 always using Makita replacement parts. 2.5 - 2.8 2.9 - 3.2 3.1 - 3.4... - Page 9 Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Tungsten-carbide tipped hammer bit • Phillips bit • Slotted bit •...
- Page 12 Makita Corporation Anjo, Aichi, Japan 884546E228...