Cisco 501G Administration Manual page 92

Configuring SIP, SPCP, and NAT
Configuring SIP
Cisco SPA500 Series and WIP310 IP Phone Administration Guide
Parameter
G729b Dynamic Payload
EncapRTP Dynamic Payload
RTP-Start-Loopback Dynamic
RTP-Start-Loopback Codec
AVT Codec Name
G711u Codec Name
G711a Codec Name
G726r16 Codec Name
G726r24 Codec Name
G726r32 Codec Name
G726r40 Codec Name
Description
G729b Dynamic Payload type.
Defaults to 99.
EncapRTP Dynamic Payload type.
Defaults to 112.
RTP-Start-Loopback Dynamic Payload.
Defaults to 113.
RTP-Start-Loopback Codec. Select one of following:
G711u, G711a, G726-16, G726-24, G726-32, G726-40,
G729a, or G723.
Defaults to G711u.
AVT codec name used in SDP.
Defaults to telephone-event.
G.711u codec name used in SDP.
Defaults to PCMU.
G.711a codec name used in SDP.
Defaults to PCMA.
G.726-16 codec name used in SDP.
Defaults to G726-16.
NOTE Not applicable to SPA525G.
G.726-24 codec name used in SDP.
Defaults to G726-24.
NOTE Not applicable to SPA525G.
G.726-32 codec name used in SDP.
Defaults to G726-32.
G.726-40 codec name used in SDP.
Defaults to G726-40.
NOTE Not applicable to SPA525G.
4
81